WP Cone Valve Forks | Direct Suspension Services | Blackfoot Direct Canada

WP Cone Valve Forks

Starting at:

  • $5,100.00

Contact Us to order a set today!


Available for all Brands/ Models. Please contact us to order

Benefits

// Lightweight construction

// More comfort when using harder set-ups

// All adjustments made externally

// No sealing surface so minimum drop of pressure after valves open

// Unlimited opening up of WP Cone Valve system means reduced harshness

// No shims, therefore no loss of damping because of bent shims

// HQ coating

Technical Description

// The WP Motorsports Cone Valve technology permits almost limitless damping performance due to a unique valving system. The setup of a conventional damping system has always been a compromise between sufficient comfort and bottoming reserves, whereas the Cone Valve technology now permits a combination of both factors, resulting in outstanding damping behavior in all driving situations. The WP Cone Valve Fork comes made to measure for every customer and is made of the highest quality materials and coatings which have been developed in close collaboration with current World Championship riders of KTM, HUSQVARNA and many more. Enjoy the riding experience with our top of the line suspension.

// Technical Data

Piston - 23 mm
Piston rod - 12 mm
Inner tube - 48 mm

// Adjustments

Spring preload
Compression Damping
Rebound Damping

Installation guide

// WP Cone Valve Forks replace the original forks. They are designed to fit in the original triple clamp and to be used with the original axle. The fork can also be reused for other motorbikes of the same type. The forks can be fine-tuned by any WP Distributor to match the requirements for individual tracks or usage (e.g. Rally). Additionally, a wide range of simple adjustments allows the rider to fully adjust the fork on both fork legs. WP Cone Valve Forks are tested and designed to offer the highest performance in combination with the WP TRAX shock absorbers.